The DJI Osmo Pocket 3 lives in my shop apron because it’s the easiest way I’ve found to grab buttery‑smooth footage while I’m juggling tools, parts, and coffee. But after a few weeks of daily use I realized the camera’s true super‑power is its hackability: a single M4 thread and a USB‑C port are all you need to bolt on all kinds of maker‑grade upgrades.
Below are six 3D‑printed accessories I designed (and thoroughly stress‑tested around the shop) to make the Pocket 3 even more versatile.
1. Backpack/GoPro Mount
Snap the Pocket 3 to your shoulder strap for true POV shots—perfect for trail walks, tool demos, or toddler‑chasing. This print also doubles as a fantastic mount for other GoPro accessories such as the suction cup mount.
- Print orientation: on base, no supports
- Hardware: GoPro Backpack Strap mount
- STL File:
[Download On Printables]
2. Rugged Protective Case
While the included cover is pretty protective of the camera. having a fully enclosed case, that isnt much larger than the stock protection is a great option.
- Print orientation: case halves vertical; 0.15 mm layer height for the latches
- Hardware: (4) M3 x 20mm screws
- STL File:
[Download On Makerworld]
3. Simple Desk Stand
This simple stand allows you to place your Pocket 3 on a desktop while still allowing access to the USB C port on the back. This is especially useful using the camera as a webcam, or shooting from low angles where a tripod might be too high.
- Print orientation: flat on base; no supports
- Hardware: none
- STL File:
[Download On Makerworld]
4. Dual Cold‑Shoe Adapter
This one really surprised me with it’s utility. This simple and quick print slides on to the bottom of the pocket 3 providing you a cold shoe mount on each side of the camera. I have found this useful for close talking head shots where I can mount my mic on the cold shoe and out of frame while still getting good audio. Similarly it’s also great for attaching a small LED light to illuminate nearby subjects.
- Print orientation: on base, print with tree supports.
- Hardware: none
- STL File:
[Download On Makerworld]
5. Low‑Profile Gimbal Cover
This snap on cover provides additional protection to the case that comes with the pocket 3. This combination provides the smallest footprint, full protection for your camera.
- Print orientation: Print on back, no supports.
- Hardware: none
- STL File:
[Download On Makerworld]
6. Ergonomic Grip Extension
If you use the Osmo Pocket 3, you know that it can be somewhat unforgiving to larger hands, even with the tripod adaptor in place. For that reason, I designed an extended grip to provide a larger grip area as well as extend your reach a bit. This grip slips over the end of the Tripod shoe for the Osmo, and has a hole through the bottom to securing attach it with a 1/4-20 screw for added security.
- Print orientation: File is pre-oriented
- Hardware: Optional 1/4-20 bolt/Screw to attach to tripod mount
- STL File:
[Download On Our Patreon (Free Tier)]
Conclusion
While we all the know how great the Osmo Pocket 3 is, these 6 prints add even more value to the platform and provide some additional luxuries.
If you build one (or all!) of these accessories tag @CraftedWithMachines on Instagram so I can see what everyone has printed!
👉 Want more? Hit subscribe on the YouTube channel and snag the STL bundle to keep future designs rolling.
Affiliate disclosure: Links marked with ↗ may be affiliate links. As an Amazon associate I earn from qualifying purchases—at no extra cost to you. Thank you for supporting more maker content!
